Top sellers




New CET1100 Series 8kVA Online Single Phase UPS View larger

CET1100 Series 8kVA Online UPS Single Phase

New product

Create Energy 8kVA Robust, Single Phase Input and Output On-Line UPS

  • 8kVA / 5600 Watt / 35 Amps UPS
  • Internal Batteries
  • Hardwired Unit
  • Manufactured in South Africa for Harsh Southern African Power Conditions
  • Optional Networking, Wider Voltage Tolerance, Surge Protection

Please contact us via email or phone for pricing

CONTACT US / Tel: +27 (0) 11 888 0410

More details

  • CET1108-1 12 Minutes
  • CET1108-2 35 Minutes
  • CET1108-3 60 Minutes
  • CET1108-4 90 Minutes

Data sheet

Nominal Capacity 8kVA / 5.3kW
Input Power Factor Up to 0.99
Input Voltage Range 230VAC +-15% (Special Units +- 30%)
Input Frequency Range 50Hz +- 5%
Output Voltage Range 230VAC +- 1%
Output Frequency 50Hz +- 0.05Hz (Free Running)
Output Waveform Pure Sine Wave, THD Less Than 5% (no load to full load) - Typically 3%
Rated Output Power Factor 0.7 Lagging
Load Power Factor Range 0.5 Lagging to Unity within kW Rating of Unit
Output Harmonic Distortion Less than 3% THD
Transient Response +-5% Under Full Load and Recovery within 30ms
Static Switch Rating 1000% for 100ms
Output Current Crest Ratio 3:1
Synchronization Slew Rate: 1Hz/s
Battery Technology AGM (Absobed Glass Mat) Sealed VRLA (Valve Regulated Lead Acid)
Nominal DC Voltage 432VDC
Battery Quantity 32 Batteries Minimum
Battery Recharge Time 6 hours to 90%
Maximum Charge Current 3A (adjustable higher, load dependent)
Static Bypass On Overload or UPS Failure
Manual Bypass User Operated for Maintenance
LCD Display UPS Status, Measurements, Loading, Fault Codes
Efficiency (Input - Output) More Than 95%
Transfer Time 0ms
Overload 200% for 15 seconds. Short Circuit Capability without Damage
Alarms 27 Possible alarms for accurate diagnosis
Communication Dry Contacts (Standard) Voltage free N/O or N/C Contacts
Communication RS232 (Optional) Monitor UPS through Direct Cable Connection and Software
Communication SNMP (Optional) Network Control UPS through Management Software and Internet
Communication GSM (Optional) Monitor UPS over GSM Network
Environment Operating Temperature 0-40 Degrees Celcius
Environment Operating Humidity 0-90% Non-Condensing
Environment Altitude 0 - 2000m without Derating
Environment Noise (at 1 meter distance) Less than 50dB
Dimensions Shot Cabinet UPS (WxDxH) mm 370 X 680 X 600
Dimensions Tall Cabinet UPS (WxDxH) mm 370 X 680 X 845
Dimensions Super Tall Cabinet UPS (WxDxH) mm 370 X 680 X 1320
Weight (kg) - Excluding Batteries Short Cabinet 55
Weight (kg) - Excluding Batteries Tall Cabinet 70
Weight (kg) - Excluding Batteries Super Tall Cabinet 95

More info

*Product Specifications are subject to change without prior notice.

The Create Energy Tower CET1100 Series On-Line UPS Unit is a robust unit manufactured in South Africa for harsh Southern African power conditions.

8kVA CET1108:

  • 8kVA / 8000VA / 5600W (5600 Watts) / 35 Amps
  • Optional Special Unit Upgrade: Includes Wider input tolerance and protection against inverter / mains paralleling
  • Optional Surge Protection

The CET1100 UPS Range includes the following sizes:

  • 3kVA UPS
  • 5kVA UPS
  • 8kVA UPS
  • 10kVA UPS
  • 15kVA UPS
  • 20kVA UPS

The 1100 series of UPSs feature:

  • Efficient Single Conversion reactive ONLINE topology based on PWM design using IGBT power devices.
  • As a result, the output remains controlled within 1% with low distortion and noise dissipation, making it ideal for: Servers, Data-centres, Critical network devices, Sensitive electronic equipment, medical, lighting, telecom and industrial uses.
  • 20 Character, 2 line Intelligent Diagnostic Display
  • Advanced PWM Design
  • Single Conversion On-Line
  • DC Overcharge Protection
  • Aesthetically Pleasing Design
  • Unity Power Factor Input
  • Long Run-time Battery Capability
  • Internal Batteries
  • Optional Special Upgrade for CET1100 Series Units provides a wider input voltage window and protection against inverter / mains parralleling
  • Optional Fitted Surge Arrestors inside the UPS

Run-times of CET1108 8kVA

Model Number of Batteries Encasement 100% Load Backup Time 75% Load Backup Time 50% Load Backup Time
CET1108-1 32 Internal, Short Cabinet 12 Minutes 20 Minutes 35 Minutes
CET1108-2 64 Internal, Tall Cabinet 35 Minutes 50 Minutes 80 Minutes
CET1108-3 96 Internal, Super Tall Cabinet 60 Minutes 80 Minutes 120 Minutes
CET1108-4 128 Internal, Super Tall Cabinet 90 Minutes 110 Minutes 160 Minutes



CET1100 Series Spec Brochure

Create Energy CET1100 Series Specifications Brochure 3kVA, 5kVA, 8kVA, 10kVA, 15kVA and 20kVA Online, Single Phase UPS

Download (744.01k)