Royal Delkor DC31 100 A/H Marine Deep Cycle Battery 12 Volts 100 A/H...
CSB HR1234WF2 Sealed Lead Acid Battery 5 Year Design Life 12 Volts 9...
POWEROAD 6 Volt 4AH Sealed Lead Acid AGM Battery Please contact us for...
Mecer IVR-2400LBKS Series 2400VA Plug and Play Inverter/Charger with...
Royal Delkor 1150K 102 A/H Storage Battery 12 Volts 102 A/H Sealed...
CSB HRL634WF2 Sealed Lead Acid Battery 8-10 Year Design Life 6 Volts 9...
Victron AGM Deep Cycle Sealed Lead Acid Battery 7-10 Year Float Design...
CSB EVH12150 Deep Cycle AGM VRLA Traction Sealed Lead Acid Battery...
CSB GP1272F2 Sealed Lead Acid Battery 5 Year Design Life 12 Volts 7.2...
Carry Case for Victron Blue Smart IP65 Chargers and accessories Smart...
Mecer IVR-1200LBKS Series 1200VA Plug...
Pure Sine Wave Inverter / Charger
2 AC Inputs and Auto connects to active source
adaptive charging, hybrid PowerAssist technology, plus multiple system integration features such as 3ph or 1ph / parallel operation.
5000VA / 4000W @ 25°C
24VDC, 120A Charger, Lithium Ion battery compatible
3-5 Working Days Availability (Confirm Stock)
Warning: Last items in stock!
Email: email@example.com or telephone: +(27) 11 888 0410
5000VA / 4000W @ 25°C
24VDC, 120A Charger
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Monitor and control your Quattro and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Quattro to setting a Geofence for hire vehicles and more...
The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two
generators. The Quattro will automatically connect to the active source.
The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a
grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that
computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge
the battery, like a water heater for example, can be connected to this output.
Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 48kW / 60kVA output
power and 840 Amps charging capacity.
Two units can be stacked to provide 120-0-120V, and additional units can be paralleled up to a total of 6 units per
phase, to supply up to 30kW / 36kVA of split phase power.
Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on
www.victronenergy.com) to a ‘European’ inverter programmed to supply 240V / 60Hz.
Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel
connected to provide 144kW / 180kVA inverter power and more than 2500A charging capacity.
The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side
supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take
account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from
This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the
capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will
make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When
the load reduces, the spare power is used to recharge the battery.
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems.
Loss of mains detection software is available.
Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or
tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Color Control GX or other GX devices.
Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can
be changed remotely.