Royal Delkor DC31 100 A/H Marine Deep Cycle Battery 12 Volts 102 A/H...
CSB HR1234WF2 Sealed Lead Acid Battery 5 Year Design Life 12 Volts 9...
CSB GP1272F2 Sealed Lead Acid Battery 5 Year Design Life 12 Volts 7.2...
CSB HRL634WF2 Sealed Lead Acid Battery 8-10 Year Design Life 6 Volts 9...
Mecer IVR-2400LBKS Series 2400VA Plug and Play Inverter/Charger with...
Royal Delkor 1150K 102 A/H Storage Battery 12 Volts 102 A/H Sealed...
CSB HRL1234WF2 Sealed Lead Acid Battery 8 Year Design Life 12 Volts 9...
CSB GP1272 Sealed Lead Acid Battery 5 Year Design Life 12 Volts 7.2 Amp...
CSB GP672 Sealed Lead Acid Battery 5 Year Design Life 6 Volts 7,2 Amp...
Steel Battery Trolley for 4 x 100 Ah Batteries Grey On Casters Flat Pack...
Pure Sine Wave Inverter / Charger, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
2000VA / 1600W @ 25°C
24VDC, 50A Charger, Lithium Ion battery compatible
30A Transfer Switch
3-5 Working Days Availability (Confirm Stock)
Warning: Last items in stock!
Email: firstname.lastname@example.org or telephone: +(27) 11 888 0410
2000VA / 1600W @ 25°C
24VDC, 50A Charger
30A Transfer Switch
The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.
Monitor and control your MultiPlus and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more...
The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the
event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than
20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on the input of the MultiPlus. Loads that should not
discharge the battery, like a water heater for example can be connected to this output (second output available
on models rated at 3 kVA and more).
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will
provide 25 kW / 30 kVA output power with 720 Amps charging capacity.
In addition to parallel connection, three units of the same model can be configured for three phase output. But
that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more
than 2000 Amps charging capacity.
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or
shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator
or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for
charging, thus preventing the generator or shore supply from being overloaded.
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement
the capacity of the alternative source. Where peak power is so often required only for a limited period, the
MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power
from the battery. When the load reduces, the spare power is used to recharge the battery.
The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems.
Loss of mains detection software is available.
Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices,
smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Color Control GX or other GX devices.
Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and
settings can be changed remotely.